Tevo Tarantula Brackets
Source: Thingiverse by thingirob
The Tevo Tarantula Brackets is a free printable 3D model from Thingiverse by thingirob. Just some brackets to firm up the little spider =) Will need 1 of each, and 2 of the Y_Base. You can download the STL file from the original listing below and print it at home.
About this model
Just some brackets to firm up the little spider =) Will need 1 of each, and 2 of the Y_Base. I didn't add any tolerance in the drawing so it may be a tight fit depending on printer setup. There is a gauge to check fit and make adjustments to your printer or scale before printing the larger pieces. These are stout enough that you can leave a 5mm gap on the ends of the 2 short 2040 on the base and a 20 mm gap on the upper z mount corner to give you 20mm more x travel. This is nice if you have a wider x carriage. Can also easily raise the Z legs 20mm, but not needed to get the full 200mm z. Make sure your printer is square when you print these. I set them up to lock it down and if your printer is out of whack, they and your printer will be after installing. I run this adjustable z stop. Use t…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Tevo Tarantula Brackets is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by thingirob.
- Who made this model?
- Designed by thingirob, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Tevo
