Ukulele
Source: Thingiverse by chuckbobuck
The Ukulele is a free printable 3D model from Thingiverse by chuckbobuck. This is my second attempt at a soprano ukulele. You can download the STL file from the original listing below and print it at home.
About this model
This is my second attempt at a soprano ukulele. It has a louder much fuller tone. This design can be printed on a minimum 5 x 8 printer platform without supports. I used PLA and the structure is very sturdy. The neck is connected to the body (lower hole) with 1/4-20 x 1-1/2 L (M6 x 35mm) socket head cap screws, washers, and nuts. The upper hole has a 1/4-20 x 3 L (M6 x 75mm) pan head screw for neck strength. The hole inserts included with my other ukulele will also work with this one. Pick one and snap it into the hole in the fretboard bottom. You will need to place the two pieces on a flat surface and smack them together for a snap fit. The ukulele fretboards and bottom flange are attached with #6 x 1/2 L (M3.5 x 12mm) flat head wood screws. The fretboard bottom and bottom flange are the …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Ukulele is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by chuckbobuck.
- Who made this model?
- Designed by chuckbobuck, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Ukulele
