Robotic arm: arm (part 3/3)
Source: Thingiverse by WonderTiger
The Robotic arm: arm (part 3/3) is a free printable 3D model from Thingiverse by WonderTiger. This is the third, and last, file publish of my robotic arm series. You can download the STL file from the original listing below and print it at home.
About this model
This is the third, and last, file publish of my robotic arm series. This component is the arm of the robotic arm. The following hardware will be needed to assemble the arm: - M3 x 8mm round head(22x), 20 used to mount the servo horns (including the gripper) - M3 x 10mm round head(34x) - M3 x 63mm round head (2x) - M3 x 16mm round head (4x) - M3 nut (2x) - M4 x 16mm round head(4x) - 8mm x 16mm x 5mm bearing, 688zz (2x) The following electronic parts will be needed: - Standard size servo (5x), e.g. TowerPro MG995 The assembly should be pretty straight forward, just follow the exploded view. Questions?? Message me! Notes: - Print the base servo mount, bearing holder, center arm bearing guide, center arm bearing guide clamp and the lower arm bushing twice. - All critical holes are oversized by…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Robotic arm: arm (part 3/3) is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by WonderTiger.
- Who made this model?
- Designed by WonderTiger, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Robotic
