Is this 3D model free to download?

Yes, 支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by 3D Printer, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 3D printable model by 3D Printer

支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 photo 1

支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 photo 2

支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 photo 3

支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 photo 4

支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 photo 5

支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架

Q: Is this 3D model free to download?

Yes, 支撑柱 防塌支撑柱 可调高度 直径30mm 螺纹M20 单节长80mm 顶天立地 支撑件 支架 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Source: MakerWorld by 3D Printer

The 支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 is a free printable 3D model from MakerWorld by 3D Printer. 支撑柱，防塌支撑柱，主体直径30mm，底座直径35mm，内部螺纹为M20，每节长度80mm，螺纹可调节伸缩长度70mm如果需要更短的螺纹或螺柱，可以在切片软件里进行分割，但是要注意分割方向 You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-10-27 Print time: 2h 43m Filament: 65 g License: SDFL · non-commercial ★ 5.0 (1) 12 makes Category: Home & Organization

Tags: 支撑柱, 防塌支撑柱, 可调高度, 顶天立地杆, 支撑件, 支架

About this model

支撑柱，防塌支撑柱，主体直径30mm，底座直径35mm，内部螺纹为M20，每节长度80mm，螺纹可调节伸缩长度70mm如果需要更短的螺纹或螺柱，可以在切片软件里进行分割，但是要注意分割方向

Frequently asked questions

Is this 3D model free to download?: Yes. 支撑柱防塌支撑柱可调高度直径30mm 螺纹M20 单节长80mm 顶天立地支撑件支架 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by 3D Printer.
Who made this model?: Designed by 3D Printer, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.