Filter Bottle Microcentrifuge  (PET PCO-1881)  (Prototype not tested yet) 3D printable model by luisz21
Filter Bottle Microcentrifuge  (PET PCO-1881)  (Prototype not tested yet) photo 1 Filter Bottle Microcentrifuge  (PET PCO-1881)  (Prototype not tested yet) photo 2 Filter Bottle Microcentrifuge  (PET PCO-1881)  (Prototype not tested yet) photo 3

Filter Bottle Microcentrifuge (PET PCO-1881) (Prototype not tested yet)

Source: Thingiverse by luisz21

The Filter Bottle Microcentrifuge (PET PCO-1881) (Prototype not tested yet) is a free printable 3D model from Thingiverse by luisz21. Be very careful not to turn on the motor outside the bottle 6g at 24000rpm is going to be ejected at around 36kg of force which is more than enough to lose one eye A working. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from Thingiverse
QR code to download the Thinger app
On a computer? Scan with your phone to install the free app.
30 saves Source: Thingiverse Updated 2026-11-18 Print time: 35m License: CC-BY-SA · commercial OK Category: Tools & Workshop

Tags: algae, algae remover, Centrifuge, harvesting, lab equipment, Microalgae, no supports, no supports needed, Petbottle

About this model

Be very careful not to turn on the motor outside the bottle 6g at 24000rpm is going to be ejected at around 36kg of force which is more than enough to lose one eye A working continuous-flow centrifuge that uses a standard 600 ml soda bottle as its housing, collector and safety shield. You print two parts totalling 8.3 g of filament. There are no seals, no O-rings, no threads and no fasteners — nothing is pressurised, so nothing can leak. Built to harvest Nannochloropsis microalgae (~3 µm cells, only ~70 kg/m³ denser than seawater), which is about as hard as small-particle separation gets. At 15 000 rpm it produces 1 937 g and clarifies roughly 4.7 L/h. WHY A BOTTLE The PCO-1881 neck (every 28 mm soda bottle) has a bore of Ø21.74 mm. Anything that goes inside has to pass through it, so the …

Frequently asked questions

Is this 3D model free to download?
Yes. Filter Bottle Microcentrifuge (PET PCO-1881) (Prototype not tested yet) is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
Where is the STL hosted?
The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by luisz21.
Who made this model?
Designed by luisz21, published on Thingiverse. Please credit the creator when sharing your print online.
Can I print this at home?
Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.

Similar 3D models in algae

More from luisz21

Browse related collections

Free 3D Prints for the Bambu Lab A1 Mini Free Thanksgiving Decoration STL Files Free Pet Accessory 3D Prints Free Calibration & Test Prints
Gear / Paid link The gear we print with Filament, tools, build plates and the hardware behind the models on Thinger, in one shoppable photo on our Amazon storefront. See the gear → Thinger earns a commission from qualifying purchases made through this link, at no extra cost to you.
Amazon price tracker / Paid links

Filament price drops for your next print

We track hundreds of filaments, resins, nozzles and tools on Amazon several times a day. Don't buy before you compare: see today's best prices and the real discount, measured against 30 days of price history.

Compare all prices →

Thinger earns a commission from qualifying purchases made through these links, at no extra cost to you. The price on Amazon at checkout is the one that counts. Israeli buyers: free shipping over $49 deals in Hebrew (קונים מישראל: הדילים עם משלוח חינם מעל $49, בעברית).

Open in Thinger Get STL