Spotmicro - robot dog
Source: Thingiverse by KDY0523
The Spotmicro - robot dog is a free printable 3D model from Thingiverse by KDY0523. I designed Spotmicro inspired by the Spotmini of Boston Dynamics. You can download the STL file from the original listing below and print it at home.
About this model
I designed Spotmicro inspired by the Spotmini of Boston Dynamics. It works on the basis of the Arduino mega, and if you use a different board, you have to redesign the 'plate' file yourself and print the 'non-mega' file instead of the regular file. The ultra sonic sensor can be used for mapping or obstacle avoidance. When you attach the servo horn to the 3D printed parts, you must use the HOTGLUE. THERE IS NO CODE YET, SO YOU HAVE TO WRITE IT YOURSELF. Assembly video part 1 : Assembly video part 2 : Instagram : To make this, you need the following... _Electronics_ 12 × MG 996 R servo motor 1 × Arduino Mega 2 × HC-SR04 Ultrasonic sensor 1 × HC-06 Bluetooth module 1 × MPU-6050 Gyro sensor 1 × I2C 16x2 LCD Module 1 × Rleil rocker switch RL3-4 7.4v Battery _Screws, Nuts and Bearings_ 8 × 'M5×1…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Spotmicro - robot dog is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by KDY0523.
- Who made this model?
- Designed by KDY0523, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
