Attack of the Petscii Robots SNES user-port adapter shell - Plus/4 compatible bottom half
Source: Thingiverse by homestar92
The Attack of the Petscii Robots SNES user-port adapter shell - Plus/4 compatible bottom half is a free printable 3D model from Thingiverse by homestar92. The original shell as designed by ChrisKewl is perfect for the C64, PET, and Vic-20. You can download the STL file from the original listing below and print it at home.
About this model
The original shell as designed by ChrisKewl is perfect for the C64, PET, and Vic-20. However, the Plus/4 has a user port which is ever so slightly more narrow than the other 8-bit Commodore systems. In order to make this work with the Plus/4, I have shaved just 2 millimeters off of either side of the shell, which provides just enough clearance for the shell to fit in the slightly smaller user port. The top half is unmodified, and so I have not included it here. You'll have to get that from ChrisKewl's original design. Note that this means the user port connector is not fully encapsulated by the shell anymore. This might make the part slightly more fragile but it should be fine if you aren't unreasonable in how you plug and unplug it.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Attack of the Petscii Robots SNES user-port adapter shell - Plus/4 compatible bottom half is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by homestar92.
- Who made this model?
- Designed by homestar92, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Attack
