3018 CNC XYZ Probe Vice
Source: Thingiverse by BusterBeagle3D
The 3018 CNC XYZ Probe Vice is a free printable 3D model from Thingiverse by BusterBeagle3D. This is a vice for a 3018 CNC that can be used to probe the X, Y, and Z origin locations of a part you want to cut. You can download the STL file from the original listing below and print it at home.
About this model
This is a vice for a 3018 CNC that can be used to probe the X, Y, and Z origin locations of a part you want to cut. I have provided both the STL or STEP file incase you would like to cut this out of metal on your CNC. I printed this in PLA with 5 perimeters and 100% infill with ironing turned on in Cura. The part has built in support so you shouldn't have to add any. You will only need to pop out the single layer hole in the tensioner piece. Watch the video for instructions on how I used the vice with Universal G-Code Sender.. For the 3D printed part you will need: 1/2 Copper Tape (Both sides conductive) 6 M5 x14mm Hex Bolts 6 M5 x 8mm T-Nuts 2 M5 x 30mm (Just needs to be longer then 1/2 inch) 2 M5 T-Nuts (This is to be pressed into the vice section that holds the tightening screws, part c…
Frequently asked questions
- Is this 3D model free to download?
- Yes. 3018 CNC XYZ Probe Vice is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by BusterBeagle3D.
- Who made this model?
- Designed by BusterBeagle3D, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in 3018
