RC Flying Wing
Source: Thingiverse by StantonFrames
The RC Flying Wing is a free printable 3D model from Thingiverse by StantonFrames. DISCLAIMER: I highly recommend that you have experience with flying model aircraft. You can download the STL file from the original listing below and print it at home.
About this model
DISCLAIMER: I highly recommend that you have experience with flying model aircraft. This is NOT a beginner plane and will most like end in a failure if you are not familiar with flying model aircraft. Fly at your own risk. Short build and flight video: The CG position is marked on the bottom of the fuselage with 2 circle cut outs. Plane specifications: Wingspan - 95cm Root chord - 16.3cm Tip chord - 11.5cm Sweep angle - 15 degrees Dry weight (no battery) - 468g Flying weight - 670g The CG position is marked on the bottom of the fuselage with 2 circle cut outs. General Print settings: Material - PLA (1.75mm) Nozzle diameter - 0.4mm Wall thickness - 0.5mm Layer height - 0.2mm Print settings for the wing sections: Temperature - 215 degrees Celcius Print speed - 25-30mm/s Cooling fan - off Inf…
Frequently asked questions
- Is this 3D model free to download?
- Yes. RC Flying Wing is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by StantonFrames.
- Who made this model?
- Designed by StantonFrames, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in RC
