DIY Electric bike (motor mount & pulley)
Source: Thingiverse by StantonFrames
The DIY Electric bike (motor mount & pulley) is a free printable 3D model from Thingiverse by StantonFrames. Building a homemade electric bike using 3D printed parts! It was definitely a learning curve, but it worked out pretty well! If you would like to build the same setup, I have. You can download the STL file from the original listing below and print it at home.
About this model
Building a homemade electric bike using 3D printed parts! It was definitely a learning curve, but it worked out pretty well! If you would like to build the same setup, I have listed the parts required below. As mentioned in the video, I would really appreciate it if you purchased the parts via my affiliate links to support my work. Thanks! Parts List Bike: (UK) (USA) 3D Printed parts: Motor: VESC: Electric scooter throttle: Saddle bag: 6s 5000mah li-po battery HTD5 12T pulley (with 8mm bore for motor shaft) HTD5 800x15mm belt 5pcs m4x30mm bolts (clamp motor mount to frame) 4pcs m4x10mm bolts (attach motor to mount) 1pcs m4x50mm bolt (roller bearings seat on this bolt) 5pcs m4 nyloc nuts 3pcs m3x10mm bolts (assembly of electronics case) 5mm wide cable ties (attach pulley to spokes) EC5 batt…
Frequently asked questions
- Is this 3D model free to download?
- Yes. DIY Electric bike (motor mount & pulley) is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by StantonFrames.
- Who made this model?
- Designed by StantonFrames, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in DIY
