Cantilever Suspension for Axial SCX10
Source: MyMiniFactory by RMTCTRL
The Cantilever Suspension for Axial SCX10 is a free printable 3D model from MyMiniFactory by RMTCTRL. I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. You can download the STL file from the original listing below and print it at home.
About this model
I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a couple nuts and bolts. But overall cost is really inexpensive. Plus if anything breaks you can always print a new part! Here is a list of parts that are needed to complete this project. Printed Parts:1 x Base1 x Mount Left - Glue to "Base" part1 x Mount Right - Glue to "Base" part2 x Pivot 12 x Pivot 22 x Spacer 12 x Spacer 2 Bought Parts:2 x M3 40mm bolt2 x M3 nut4 x M2 16mm bolt4 x M2 nut(you can use M3 bolts and nuts instead of M2, you just need to drill the holes a little bigger) Bought or made Part:2 x Push rods 28mm long from center of ball joint to…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Cantilever Suspension for Axial SCX10 is free to download from MyMiniFactory. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MyMiniFactory, not by Thinger. We link you directly to the original listing by RMTCTRL.
- Who made this model?
- Designed by RMTCTRL, published on MyMiniFactory. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in axial
