Good-TFT 5" + Pi 4B enclosure and mounting
Source: Thingiverse by TeachingTech
The Good-TFT 5" + Pi 4B enclosure and mounting is a free printable 3D model from Thingiverse by TeachingTech. This is an enclosure for a Raspberry Pi 4B attached to a Good-tft 5" touch screen. You can download the STL file from the original listing below and print it at home.
About this model
This is an enclosure for a Raspberry Pi 4B attached to a Good-tft 5" touch screen. Suitable for Octoprint, Klipper Screen or similar. I designed it to fit on both my Seckit SK-Tank and Rat Rig V-core 3. Source CAD if you want to remix: Modelled with help of this model: Raspberry Pi 4 model: I purchased the TFT from here (Pi 4B version): Instructions to setup TFT on Pi: As seen in this video: All parts print without support. PLA is fine unless your Pi is running very hot. 1. The Raspberry Pi slides into the front housing. 2. The inner brace then clamps the Pi in place. Two M3 x 8 counter sunk bolts secure the brace. 3. Slide anchors in from the rear through the rear lid. M3 x 18 mm bolts for each anchor. The standard rear lid is to suit four anchors. The alternative version is to only suit …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Good-TFT 5" + Pi 4B enclosure and mounting is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by TeachingTech.
- Who made this model?
- Designed by TeachingTech, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Good-TFT
