CR-6 SE LGX Lite Direct Drive Mount
Source: Thingiverse by Chirpy8
The CR-6 SE LGX Lite Direct Drive Mount is a free printable 3D model from Thingiverse by Chirpy8. Easy to print (no supports needed) and very stable mounting platform for the Bondtech LGX Lite Direct Drive configuration for the Creality CR-6 SE. You can download the STL file from the original listing below and print it at home.
About this model
Easy to print (no supports needed) and very stable mounting platform for the Bondtech LGX Lite Direct Drive configuration for the Creality CR-6 SE. This mounting platform provides a stable platform for the tiny extruder. It also leaves room for custom fan or hotend covers as it still exposes the bolts holding the stock hotend cover in place. Best printed in PLA for durability (PETG tends to flex too much), or anything without flex, such as ABS, ASA, CF, etc. You will need a short piece of PTFE tube from the LGX Lite extruder to the hotend (mine was 53mm for a Phaetus Dragon hotend). The rest of the setup and configuration is explained in the Bondtech post for the larger LGX extruder: You will need 2 M3x12mm bolts to attach the mount platform to the bottom of the extruder. Plus a M3x8mm bol…
Frequently asked questions
- Is this 3D model free to download?
- Yes. CR-6 SE LGX Lite Direct Drive Mount is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Chirpy8.
- Who made this model?
- Designed by Chirpy8, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in CR-6
