Ratchet and Pawl system.
Source: MyMiniFactory by Alicia Gardiner
The Ratchet and Pawl system. is a free printable 3D model from MyMiniFactory by Alicia Gardiner. This is an original design of a ratchet and pawl system i made for a university project, i adapted it so it could be 3D printed. You can download the STL file from the original listing below and print it at home.
About this model
This is an original design of a ratchet and pawl system i made for a university project, i adapted it so it could be 3D printed. This system is designed to allow the ratchet to only turn in one direction. How it is supposed to function when assembled is shown here: To assemble it: insert the shaft into the middle hole of the base and put the keyway into the notch on the end of the shaft, then put the ratchet onto the assembly as shown in the picture. Now put the pawl onto the bolt and insert that into the upper base hole with the large bolt end at the front then secure it with the nut allowing the pawl to rotate freely. The notch on the base on the right hand side is meant to attach to a spring, in which the other end is attached to the pawl to make the mechanism spring loaded however gr…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Ratchet and Pawl system. is free to download from MyMiniFactory. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MyMiniFactory, not by Thinger. We link you directly to the original listing by Alicia Gardiner.
- Who made this model?
- Designed by Alicia Gardiner, published on MyMiniFactory. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in engineering
