NZXT H510 HDD vibration mount
Source: Thingiverse by MuchMore
The NZXT H510 HDD vibration mount is a free printable 3D model from Thingiverse by MuchMore. Anti vibration mount for the NZXT H510 case. You can download the STL file from the original listing below and print it at home.
About this model
Anti vibration mount for the NZXT H510 case. If you don't have these special screws that are shown in the pictures than print the files with the name _small_screw however I did not test those. the ending _46 and _35 refer to the diameter of the mounting holes. if you want to install 2xHDD than print one of each, if you only want to install 1 print only the one with _35. before mounting you should tap the 3,5mm hole to M4 DO NOT USE PLA, HDD get warm and will distort the springs. PC or PA is recomended. A fan can be added by drilling two 3,5mm holes into the outer wall and using strandart plastic fan mounting screws for 2xHDD you need: - 4x M4x60-80 screws - 8x HDD screws (some funny sized threats) ~13mm long or short normal ones for 1xHDD you need: - 4x M4x20-40 screws - 4x HDD screws (som…
Frequently asked questions
- Is this 3D model free to download?
- Yes. NZXT H510 HDD vibration mount is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by MuchMore.
- Who made this model?
- Designed by MuchMore, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in NZXT
