Star Lord's Boot Jets from Guardians of the Galaxy
Source: Thingiverse by captchemo
The Star Lord's Boot Jets from Guardians of the Galaxy is a free printable 3D model from Thingiverse by captchemo. No Peter Quill Cosplay would be complete without boot jets! These were done in 123 Design (not my best work, but pretty accurate). You can download the STL file from the original listing below and print it at home.
About this model
No Peter Quill Cosplay would be complete without boot jets! These were done in 123 Design (not my best work, but pretty accurate). This is a work in progress. As soon as I print the other set, I'll assemble, paint, then add more pictures of the finished pieces. Hope you enjoy. UPDATE: 10/4/14 Finally finished painting! I've attached pictures of the finished pieces. We decided to go with a Velcro strap around the ankle to hold them on because of the zipper placement of the leg chaps my son used which didn't provide a good hold for stick on Velcro. Also, be careful with the joining of the upper and lower jet halves. I super glued them and had one break apart on me while painting. I re-glued with acetone (since they were ABS) then drilled and drove a small screw at an angle through the bottom…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Star Lord's Boot Jets from Guardians of the Galaxy is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by captchemo.
- Who made this model?
- Designed by captchemo, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in boot jet
