Tri-Bladed Boomerang
Source: Thingiverse by schm4704
The Tri-Bladed Boomerang is a free printable 3D model from Thingiverse by schm4704. Tri-bladed boomerang for recreational throwing. You can download the STL file from the original listing below and print it at home.
About this model
Tri-bladed boomerang for recreational throwing. The print is intended to be 200 mm wide and about 178 mm high, at a thickness of 3.5 mm. Other dimensions may work, but your mileage may vary. The 4mm holes are intended to be filled with metal; the additional weight will help with spin retention and distance. I put pieces of 4mm copper rivet into the holes and peened those a little so they stretched outwards and stayed put. Another possibility would be to screw in pieces of M5 thread, which has a core diameter of just about 4 mm and should fit nicely. Depending on the resolution of your print, it may be helpful to smooth the surface a little. I use a card scraper for this. PS. The strange spots around the holes in the rendered picture are shading artifacts from Blender. The model itself shou…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Tri-Bladed Boomerang is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by schm4704.
- Who made this model?
- Designed by schm4704, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Tri-Bladed
/https://fbi.cults3d.com/uploaders/40588206/illustration-file/a0115335-8a48-4a01-854b-1817e33308f9/Hand_Spinners_-_Fidget_Toys_Water_Mark.jpg)
