3 level spice rack
Source: Thingiverse by subboo
The 3 level spice rack is a free printable 3D model from Thingiverse by subboo. To assemble the rack, you will need 3 planks 2.5" x 1/4" and 1 plank 1.5" x 1/4" (vertical support at the back of the rack; optional) (source from HomeDepot or Lowe's). You can download the STL file from the original listing below and print it at home.
About this model
To assemble the rack, you will need 3 planks 2.5" x 1/4" and 1 plank 1.5" x 1/4" (vertical support at the back of the rack; optional) (source from HomeDepot or Lowe's). Due to a slight variation in sizes you might want to test print the opening slot before buying the planks and scale the model . Cut the planks to the desired length (make it at least 1/4" shorter than the width of the cabinet to fit it inside). Wall-to-wall racks cannot be inserted without removing the cabinet door (US-style cabinets with the frame). For the cabinets up to 15", print 2 side pieces ( mirror one in the slicer to get left and right sides ). For wider cabinets print one of the middle support pieces. Optionally you can print 2 pieces with passthrough holes and use them as sides. Slide the wooden planks into corr…
Frequently asked questions
- Is this 3D model free to download?
- Yes. 3 level spice rack is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by subboo.
- Who made this model?
- Designed by subboo, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in 3
