Is this 3D model free to download?

Yes, 宝可梦三首恶龙 17cm｜多色分件｜无需AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by SeanIXz, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

宝可梦三首恶龙 17cm｜多色分件｜无需AMS 3D printable model by SeanIXz

宝可梦三首恶龙 17cm｜多色分件｜无需AMS

Q: Is this 3D model free to download?

Yes, 宝可梦 三首恶龙 17cm｜多色分件｜无需AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Source: MakerWorld by SeanIXz

The 宝可梦三首恶龙 17cm｜多色分件｜无需AMS is a free printable 3D model from MakerWorld by SeanIXz. ⚠️ 翅翼、头部尖角和尾端属于细长结构，拆除支撑及安装时请轻拿轻放，不要直接扳动翅翼。为我助力如果喜欢这个模型，欢迎点赞、收藏并分享你的打印成品。也欢迎在评论区交流打印和安装经验。三首恶龙多色分件手办，高度约17cm。模型按照不同颜色拆分打印，普通单色3D打印机也可以逐盘完成，无需AMS。主体采用深灰、蓝色与紫红色搭配，三个头部和六翼造型辨识度很高，完成后适. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-09-17 Print time: 2d 9h Filament: 478 g Multi-colour (AMS) License: SDFL · non-commercial 3 makes Category: Figures & Miniatures

Tags: 宝可梦, 三首恶龙, hydreigon, 多色分件, 无需ams, 手办, 摆件, 动漫, 普通打印机友好

About this model

⚠️ 翅翼、头部尖角和尾端属于细长结构，拆除支撑及安装时请轻拿轻放，不要直接扳动翅翼。为我助力如果喜欢这个模型，欢迎点赞、收藏并分享你的打印成品。也欢迎在评论区交流打印和安装经验。三首恶龙多色分件手办，高度约17cm。模型按照不同颜色拆分打印，普通单色3D打印机也可以逐盘完成，无需AMS。主体采用深灰、蓝色与紫红色搭配，三个头部和六翼造型辨识度很高，完成后适合作为桌面摆件或宝可梦主题收藏。文件中共包含6个打印盘：第1盘：完整装配预览，用于确认颜色和安装位置第2—6盘：按颜色拆分的实际打印零件打印完成后，先对所有接口进行试装，确认方向无误再使用少量胶水固定。安装翅翼、头部尖角及较细零件时，建议从连接根部轻压，避免握住末端用力。模型特点：约17cm成品尺寸多色分件设计无需AMS普通单色打印机友好预设0.16mm层高预设树状自动支撑预设自动Brim包含完整装配参考盘【创作思路】这次制作选择了三首恶龙极具辨识度的三个头部与六翼轮廓，并针对FDM打印重新整理了颜色分件和连接关系。设计时希望在保留角色压迫感和动态轮廓的同时，降低多色打印门槛，因此将不同颜色的部件分开放置到独立打印盘中。即使没有AMS，也可以使用普通单色打印机逐盘换料完成。主体、腹部、头冠、口腔和细节零件分别拆分，既能减少频繁换色产生的耗材浪费，也方便后期试装、调整和补色。【打印配置说明】推荐使用0.4mm喷嘴和PLA材料打印。层高：0.16mm墙层数：2层填充：15%填充图案：陀螺支撑：树状自动支撑Brim：自动，宽度5mm打印盘数量：6盘打印方式：按颜色分盘打印，无需AMS第1盘为完整装配和配色参考。实际分件位于第2—6盘，每个分件盘均使用单一耗材槽，可使用普通单色打印机逐盘打印。打印前请检查细长翅翼和尖角零件的支撑接触情况。拆支撑时建议使用尖嘴钳，从外向内分段处理，不要直接拉扯零件。【安装说明】打印完成后先按装…

Frequently asked questions

Is this 3D model free to download?: Yes. 宝可梦三首恶龙 17cm｜多色分件｜无需AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by SeanIXz.
Who made this model?: Designed by SeanIXz, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.