Is this 3D model free to download?

Yes, 宝可梦超级诅咒娃娃 16cm｜多色分件｜无需AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by SeanIXz, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

宝可梦超级诅咒娃娃 16cm｜多色分件｜无需AMS 3D printable model by SeanIXz

宝可梦超级诅咒娃娃 16cm｜多色分件｜无需AMS

Q: Is this 3D model free to download?

Yes, 宝可梦 超级诅咒娃娃 16cm｜多色分件｜无需AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Source: MakerWorld by SeanIXz

The 宝可梦超级诅咒娃娃 16cm｜多色分件｜无需AMS is a free printable 3D model from MakerWorld by SeanIXz. ⚠️ 温馨提示：头顶拉链尾巴、紫色火焰底座的火苗尖、爪尖和帽子尖角属于细长/尖细结构，拆除支撑及安装时请轻拿轻放，不要直接扳动拉链尾巴末端。👍 如果喜欢这个模型，欢迎点赞 ❤️、收藏 ⭐ 并分享你的打印成品📸。也欢迎在评论区💬交流打印和安装经验。👻 超级诅咒娃娃多色分件手办，高约 16cm（双臂展开约 161mm），Mega 进化造型还原度很高。🎨. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-09-21 Print time: 2d 12h Filament: 534 g Multi-colour (AMS) License: SDFL · non-commercial 2 makes Category: Figures & Miniatures

Tags: 宝可梦, 超级诅咒娃娃, megabanette, pokemon, 分件打印, 无需ams, 幽灵系, 拼装模型, 桌面摆件

About this model

⚠️ 温馨提示：头顶拉链尾巴、紫色火焰底座的火苗尖、爪尖和帽子尖角属于细长/尖细结构，拆除支撑及安装时请轻拿轻放，不要直接扳动拉链尾巴末端。👍 如果喜欢这个模型，欢迎点赞 ❤️、收藏 ⭐ 并分享你的打印成品📸。也欢迎在评论区💬交流打印和安装经验。👻 超级诅咒娃娃多色分件手办，高约 16cm（双臂展开约 161mm），Mega 进化造型还原度很高。🎨 模型按照不同颜色拆分打印，普通单色 3D 打印机也可以逐盘完成，无需 AMS 🚫。主体采用⚫黑色、🟡金黄色、🔴红粉色与🟣紫色搭配，金色拉链与镶边、紫色诅咒火焰底座辨识度拉满，完成后适合作为桌面摆件或宝可梦主题收藏。📦 文件中共包含多色分件模型，建议按颜色分盘打印：- ⚫ 黑色：帽子、身体、手臂套- 🟡 金黄色：拉链、帽冠镶边、袖口装饰- 🔴 红粉色：双爪、裙摆内衬- 🟣 紫色：诅咒火焰底座🔧 打印完成后，先对所有接口进行试装，确认方向无误再使用少量胶水固定。安装拉链尾巴、火焰底座及较细零件时，建议从连接根部轻压，避免握住末端用力。🌟 模型特点：- 📏 约 16cm 成品尺寸（高，含拉链尾巴与底座）- 🧩 多色分件设计（约 4 色）- 🚫 无需 AMS- 🖨️ 普通单色打印机友好- 🔍 预设 0.16mm 层高- 🌳 预设树状自动支撑- 🟦 预设自动 Brim- 📋 包含完整装配参考盘💡 【创作思路】💡 这次制作选择了超级诅咒娃娃 Mega 进化后极具辨识度的造型：加深的眼神、额头与帽冠的金色拉链镶边、加长并弯曲的拉链尾巴，以及脚下翻涌的紫色诅咒火焰底座，并针对 FDM 打印重新整理了颜色分件和连接关系。🎯 设计时希望在保留角色诡异感与立体感的同时，降低多色打印门槛，因此将不同颜色的部件分开放置到独立打印盘中。即使没有 AMS，也可以使用普通单色打印机逐盘换料完成。🧩 帽子、身体、手臂套、拉链、爪子、裙摆内衬和火焰底座分别拆分，既…

Frequently asked questions

Is this 3D model free to download?: Yes. 宝可梦超级诅咒娃娃 16cm｜多色分件｜无需AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by SeanIXz.
Who made this model?: Designed by SeanIXz, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.