Chisel Sharpening Guide
Source: Thingiverse by DustBunny67
The Chisel Sharpening Guide is a free printable 3D model from Thingiverse by DustBunny67. I ordered some diamond sharpening stones like these:- (Actual stone size is 155 x 67 x 6.5mm but there is sufficient wiggle room to accommodate a slightly larger stone.) so I. You can download the STL file from the original listing below and print it at home.
About this model
I ordered some diamond sharpening stones like these:- (Actual stone size is 155 x 67 x 6.5mm but there is sufficient wiggle room to accommodate a slightly larger stone.) so I thought I would make a honing guide to suit them for my chisels. I didn't like the homing guides that ride on the surface of the stone as they quite easily mar the surface of the stone so this design uses a running guide style chisel holder. One side of the carriage is set at 25° for the primary bevel, the other side is set to 30° for the secondary bevel. EDIT: I have added some alternate bases to suit the most common whetstones. See: for details and files. They are designed to work with the same carriage as this design so you can just print the appropriate base to suit your stone.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Chisel Sharpening Guide is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by DustBunny67.
- Who made this model?
- Designed by DustBunny67, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in chisel
