Right angle clamp
Source: Thingiverse by stenokit
The Right angle clamp is a free printable 3D model from Thingiverse by stenokit. ENGLISH This simple clamp can be used to keep two boards at a right angle while the assembly is curing. You can download the STL file from the original listing below and print it at home.
About this model
ENGLISH This simple clamp can be used to keep two boards at a right angle while the assembly is curing. I posted an all-in-one STL including the four parts and a 0.2mm height adhesion brim. And of course all parts as individual STL's. No supports are required. I suggest a filling of 20% to 50%. Additional hardware required : - M8 nut - M8 x 80 (or longer) scew/bolt UPDATE august 2024 I added a new version of the Knob. Just one part to print and no glue required. Thank you Karul for your advice. FRENCH Un serre-joint d'angle simple pour assembler deux pièces en attendant que la jointure soit permanente. Un STL regroupe les quatre pièces avec une couche d'adhérence de 0,2 mm. Et bien-sûr il y les STL des quatre pièces individuelles. Aucun support n'est requis. Je conseille un remplissage ent…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Right angle clamp is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by stenokit.
- Who made this model?
- Designed by stenokit, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Right
More from stenokit
