CableManager
Source: MyMiniFactory by Muzz64
The CableManager is a free printable 3D model from MyMiniFactory by Muzz64. If your device / Ethernet / power cables all too often ends up in a tangled mess then do yourself a favour and print a CableManager! This simple device prints in around 15. You can download the STL file from the original listing below and print it at home.
About this model
If your device / Ethernet / power cables all too often ends up in a tangled mess then do yourself a favour and print a CableManager! This simple device prints in around 15 minutes (on a MakerBot), uses very little filament, and quickly clips into place on your devices power cable. Refer to the images for the recommended sequence. Once installed in this order you can unclip the length of cable required from each end to manage the length of cable as required... and secure it in a tidy coil when all clipped back in place. A quick and easy solution that keeps your devices power cable under control. At standard scale the CableManager works with 6.75mm diameter power cables which are common for laptop power supplies. Scale up/down as required to suit other common cable sizes. A second .stl has b…
Frequently asked questions
- Is this 3D model free to download?
- Yes. CableManager is free to download from MyMiniFactory. Open it in the free Thinger app, or use the "Download from MyMiniFactory" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MyMiniFactory, not by Thinger. We link you directly to the original listing by Muzz64.
- Who made this model?
- Designed by Muzz64, published on MyMiniFactory. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in computer
/https://fbi.cults3d.com/uploaders/14457932/illustration-file/98c6d2aa-8d20-4241-91e3-67dfd7998870/kp8lFEad.jpg)
