Magmarex — Prismana Core | Aniimo HueForge
Source: MakerWorld by BlueberryForge
The Magmarex — Prismana Core | Aniimo HueForge is a free printable 3D model from MakerWorld by BlueberryForge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of. You can download the STL file from the original listing below and print it at home.
About this model
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #ffffff PLA+ Sunlu White Transmission Distance: 5 #ff7713 PLA+ Sunlu Sunny Orange Transmission Distance: 8 #ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5This print uses 5 unique filamentsSingle AMS Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #12 (1.04mm) swap to White At layer #13 (1.12mm) user Pause to switch Blue Gray with Pure Yellow At l…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Magmarex — Prismana Core | Aniimo HueForge is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by BlueberryForge.
- Who made this model?
- Designed by BlueberryForge, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in magmarex
