Pet Wheelchair
Source: Thingiverse by wwendorf
The Pet Wheelchair is a free printable 3D model from Thingiverse by wwendorf. This is a pet wheelchair that I designed and built for a friends small dog. You can download the STL file from the original listing below and print it at home.
About this model
This is a pet wheelchair that I designed and built for a friends small dog. It should work for cats as well, but that has not yet been tested. Items needed to purchase: 4 - 608 bearings 2 - bolts 1/4-20 x 2" long 2 - nylock nuts 1/4-20 18 - 10-24 set screws approximately 24" of aluminum tubing 1/2" diameter The quantities of parts needed to print are: 2 - wheels 1 - tube engagement - 4 degree - left 1 - tube engagement - 4 degree - right 2 - belly & Leg supports 2 - front harness clips 2 - rear supports 2 - Wheel Support - Angled (or 2 Wheel Supports which are straight) There are 2 options for the wheel supports. If the dog likes to run and play, I recommend the angled wheel supports, but there are non-angled wheel supports if necessary. Once all the parts are printed, you will need to att…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Pet Wheelchair is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by wwendorf.
- Who made this model?
- Designed by wwendorf, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Pet
