PICCOLO, NO AMS
Source: MakerWorld by REAL STUDIO
The PICCOLO, NO AMS is a free printable 3D model from MakerWorld by REAL STUDIO. a 21-piece press-fit figure. You can download the STL file from the original listing below and print it at home.
About this model
a 21-piece press-fit figure. No AMS, no glue, no paint.A calm green warrior with pointed ears, two long antennae and his arms folded, wrapped in a big white cape that the wind throws out to one side. About 18 cm tall on its oval base.It comes off the plates as 21 separate pieces and goes together in your hands. Every plate is a single colour, so any 0.4 mm printer with one spool at a time will do: there is no AMS anywhere in this model, and nothing has to be painted. The pink stripes of the arms, the blue sash, the brown boots and the white eyes are all printed parts that push into their own seats.- Press-fit, no glue: every joint is a smooth pin or plug with a measured clearance (0.08 to 0.12 mm per side), so the parts hold on friction and come apart again.- One long pin locks two parts: …
Frequently asked questions
- Is this 3D model free to download?
- Yes. PICCOLO, NO AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by REAL STUDIO.
- Who made this model?
- Designed by REAL STUDIO, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in figure
