Land Rover Chassis
Source: Thingiverse by zxcvbn
The Land Rover Chassis is a free printable 3D model from Thingiverse by zxcvbn. Chassis for the Austar 1/10 D90. You can download the STL file from the original listing below and print it at home.
About this model
Chassis for the Austar 1/10 D90. Mine came from Banggood. Uses the running gear from tahustvedt's monster truck Still needs the front/rear frames and battery mount. Have included my cv joints, axles and side gears for the diffs. You will need the rest of the diff parts and center gearbox from Tahustvedt's Monster Truck. I have made CV joint drive shafts to go from the gearbox to the diffs, they are on here in my stuff but the ball ends probley need updating to the v3 ones that are here. 5/12/17 Did this ages ago but haven't had proper internet or PC to upload anything. Added a battery mount to the frame, made it to fit the 2s 4000mah lipos I made from a turnigy 4s I had, there is still room to make it fit bigger batterys if needed. 21/01/18 added 0.2 smaller axles so they fit easier. Start…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Land Rover Chassis is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by zxcvbn.
- Who made this model?
- Designed by zxcvbn, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Land
