Steamdeck Clip on Stand
Source: MakerWorld by Vinny02
The Steamdeck Clip on Stand is a free printable 3D model from MakerWorld by Vinny02. The clip-on stand hold the Steam Deck at 2 positions: 60-degree and 120-degree. You can download the STL file from the original listing below and print it at home.
About this model
The clip-on stand hold the Steam Deck at 2 positions: 60-degree and 120-degree. In addition, it can clip on anywhere along the flat part in the middle of the Steam Deck, but will block some of the air intake/exhaust. To prevent the clip sliding. Use electrical tape to line the inner-side of the bottom hook (of the clip). P.S: I included the the .stl file for the bare clip, for those who want to remix the design for their own attachment. Notes:The stand needed to be printed flat and at (0.1 mm) for the best gear shape. But meant the round part of the pin can be rough in shape, and may need some shaving with a razor blade before it can fit into the clip.The clip need to be print on its side for structural reason. It's thin-tall profile, make sure to do the tramming/bed-meshing and print the …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Steamdeck Clip on Stand is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Vinny02.
- Who made this model?
- Designed by Vinny02, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in steamdeck
