Gridfinity 4x4 and 4x2 base French cleat mount
Source: MakerWorld by shoooo
The Gridfinity 4x4 and 4x2 base French cleat mount is a free printable 3D model from MakerWorld by shoooo. Two options for attaching back (cleat) on the two piece versionCA glue. You can download the STL file from the original listing below and print it at home.
About this model
Two options for attaching back (cleat) on the two piece versionCA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glueHardware, made for ¼ bolts2 x ¾" long ¼ 20 bolt2 x ¼ 20 nutsDesign details:Holes on the bottom serve to prevent dust accumulationMade for 3/4" plywood (note: 3/4" plywood is usually closer to 0.7" thick, or around 18mm).Designed around standard imperial specs common in most US shops (sorry world)Could easily be remixed for just about any mounting systemPrint detailsUse snug supports just for the vertical holes, no other support needed (might even be able to get away with eliminating those)Adaptive layer height saves a bunch of timePrinted great on a P1P, using Bambulabs…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Gridfinity 4x4 and 4x2 base French cleat mount is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by shoooo.
- Who made this model?
- Designed by shoooo, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in gridfinity
