Saw and thin tool holder with French cleat backer
Source: MakerWorld by shoooo
The Saw and thin tool holder with French cleat backer is a free printable 3D model from MakerWorld by shoooo. Holes are designed for screwing together with M4 bolts (threads not modelled, should adequately hold in the 3.5mm holes) or can just be glued together with CA glue.Cam lobe tires. You can download the STL file from the original listing below and print it at home.
About this model
Holes are designed for screwing together with M4 bolts (threads not modelled, should adequately hold in the 3.5mm holes) or can just be glued together with CA glue.Cam lobe tires work great printed with TPU for friction, but a version with the cam lobe in full is also attached (may need some electrical tape or similar to provide enough friction for engaging the cam).
Frequently asked questions
- Is this 3D model free to download?
- Yes. Saw and thin tool holder with French cleat backer is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by shoooo.
- Who made this model?
- Designed by shoooo, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Saw
/https://fbi.cults3d.com/uploaders/27375431/illustration-file/836c0706-3c2c-4db7-8c34-3b89e74a612a/Billy_Cults_Cover.png)
