Echo Dot 4th & 5th Gen Upright Wall Mount V5
Source: MakerWorld by People Want Prints
The Echo Dot 4th & 5th Gen Upright Wall Mount V5 is a free printable 3D model from MakerWorld by People Want Prints. I made this after buying a echo dot 5th gen with clock. You can download the STL file from the original listing below and print it at home.
About this model
I made this after buying a echo dot 5th gen with clock. My old mounts would have the echo's face downwards allowing for easy access to the buttons but with this model that wasn't going to work, instead of buying a new mount I decided to make one.this features slots at the bottom so the LED ring can shine throughPass-Through InstallM4.5 (5/32in) screws are recommended for mounting. 20mm(3/4in) length should be plenty depending on your anchoring system.If your anchor requires the screw to go further in to fully engage, purchase new ones and add 10mm(3/8in) from your original screw length. Plate install Use double sided tape or epoxy to install this version.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Echo Dot 4th & 5th Gen Upright Wall Mount V5 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by People Want Prints.
- Who made this model?
- Designed by People Want Prints, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in echodot
