Simple Raspberry Pi touch screen case
Source: MakerWorld by Wilian
The Simple Raspberry Pi touch screen case is a free printable 3D model from MakerWorld by Wilian. This is a simple case for a Raspberry Pi (any version) with the LCD touchscreen from the Raspberry Pi Foundation. Parts needed:4 x 3mm thread inserts4 x screws for the LCD. You can download the STL file from the original listing below and print it at home.
About this model
This is a simple case for a Raspberry Pi (any version) with the LCD touchscreen from the Raspberry Pi Foundation. Parts needed:4 x 3mm thread inserts4 x screws for the LCD screen4 x M3x6mm screws (back lid)The screws can be welded to the included knobs, or flat head screws can be used. Print settings and instructions:Easy to print, without supports. If printing in higher speeds, use a small brim to avoid warping with the big flat pieces.All parts can be printed without support, using the correct orientation.Screen frame: print with the flat side to the bed.Case: print with the tabs touching the bed.Back lid: print with the tiny screw chamfers facing up.Stand: print facing up, with the flat grid to the bed.Infill: from 8% to 15% is enough. Grid pattern fits better with the flat top layers.S…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Simple Raspberry Pi touch screen case is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Wilian.
- Who made this model?
- Designed by Wilian, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in raspberrypi
