Harry Potter Time Turner - Print in Place
Source: MakerWorld by InaniaEtVana
The Harry Potter Time Turner - Print in Place is a free printable 3D model from MakerWorld by InaniaEtVana. A moving, print-in-place version of your favourite magical McGuffin: the Timer Turner! Both a 3D version (minimal assembly required) and a 2D version (fully print-in-place) are. You can download the STL file from the original listing below and print it at home.
About this model
A moving, print-in-place version of your favourite magical McGuffin: the Timer Turner! Both a 3D version (minimal assembly required) and a 2D version (fully print-in-place) are available. Prints quick and requires minimal filament (around 12g).Printing instructionsThe model is not very hard to print, but does contain some small overhangs and needs proper part cooling. To ensure smooth movement the following settings are strongly recommended.Layer height 0.12mmFirst layer height 0.16mmOuter wall thickness 0.50mmNo cooling for first 1 layerCooling overhang threshold 10%Supports OFFTwo versions are provided low tolerance (0.25mm) and high tolerance (0.4mm). The former will result in a more snug fit, but movement may be too stiff, depending on your printer. The high tolerance version is a bit …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Harry Potter Time Turner - Print in Place is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by InaniaEtVana.
- Who made this model?
- Designed by InaniaEtVana, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in fidget
More from InaniaEtVana
