Fourth Wing (Book Cover) - Hueforge Print and Lithophane
Source: MakerWorld by cyanidesugar
The Fourth Wing (Book Cover) - Hueforge Print and Lithophane is a free printable 3D model from MakerWorld by cyanidesugar. Fourth Wing Cover Art - Hueforge Print and Lithophane Perfect gift for your favourite book lover! This print serves as both a front and back-lit hueforge print. You can download the STL file from the original listing below and print it at home.
About this model
Fourth Wing Cover Art - Hueforge Print and Lithophane Perfect gift for your favourite book lover! This print serves as both a front and back-lit hueforge print. Hold it up against a light and the light will shine through the print. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Meta Sunlu White Transmission Distance: 6 PLA Sunlu Beige Transmission Distance: 8.2 PLA+ Sunlu Coffee Transmission Distance: 3 PLA Kingroon Black Transmission Distance: 0.3Swap Instructions: Start with White At layer #4 (0.4mm) swap to Beige At layer #6 (0.56mm) swap to Coffee At layer #12 (1.04mm) swap to Black for the rest.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Fourth Wing (Book Cover) - Hueforge Print and Lithophane is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by cyanidesugar.
- Who made this model?
- Designed by cyanidesugar, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in hueforge
More from cyanidesugar
