Printable Hand Vise
Source: MakerWorld by blecheimer
The Printable Hand Vise is a free printable 3D model from MakerWorld by blecheimer. When working with small models sometimes my fingers just are too big. You can download the STL file from the original listing below and print it at home.
About this model
When working with small models sometimes my fingers just are too big. So I made a fully printable hand vise.To clamp something you simply turn the handle. Print everything with a layer height of 0.2mm or lower. Support is not needed. The thread is close to M12 and should work directly after printing. You can lubricate the thread with candle wax so it runs smoother. For the hinges I designed hinge rivets. Install the claws to the claw-bridge then insert the rivets. Heat up a flat piece of metal (e.g. a flat screwdriver) and press it on the small end of the rivet. The rivet will melt in place. Disclaimer:This work by blecheimer is licensed under CC BY-NC-SA 4.0You are not allowed to copy this model to other 3D printing websites without my permission.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Printable Hand Vise is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by blecheimer.
- Who made this model?
- Designed by blecheimer, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in vice
More from blecheimer
