Is this 3D model free to download?

Yes, Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode) is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by Osprey Designs, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode) 3D printable model by Osprey Designs

Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode) photo 1

Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode) photo 2

Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode)

Source: MakerWorld by Osprey Designs

The Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode) is a free printable 3D model from MakerWorld by Osprey Designs. IMPORTANT:You must use these settings in order to make this bottle work properly and be completely watertight.You must print the ‘MAKERBOTTLE’ file in PETG filamentNozzle. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

209 saves Source: MakerWorld Updated 2026-09-27 Print time: 19m Filament: 3 g License: CC-BY · commercial OK ★ 5.0 (4) 112 makes Category: Education & Science

Tags: bottle, vase, water, tpu, petg, vasemode, waterbottle

About this model

IMPORTANT:You must use these settings in order to make this bottle work properly and be completely watertight.You must print the ‘MAKERBOTTLE’ file in PETG filamentNozzle Temp:~240CBed Temp:~80CLine Width:0.8mmLayer Hight:0.2Speed:35mm/sSet to Spiralize outer contour/Vase mode You must Print the ‘TPU CAP’ in TPU filamentNozzle Temp:~220CBed Temp:~60CLine Width:0.4mmLayer Hight:0.2Speed:35mm/sSet to Spiralize outer contour/Vase modeNotes:-The TPU Cap is made with what I like to call “Negative Tolerance” where it is slightly smaller than the diameter of the bottle throat, giving it a friendly squeeze on the bottle to keep it watertight even upside down! Scale up or down slightly to get it perfect for your printer.-Settings can be changed to fit your individual needs but I do recommend them f…

Frequently asked questions

Is this 3D model free to download?: Yes. Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode) is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Osprey Designs.
Who made this model?: Designed by Osprey Designs, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.