Cable chain minimalist, open, fast print
Source: MakerWorld by remi.rafael
The Cable chain minimalist, open, fast print is a free printable 3D model from MakerWorld by remi.rafael. SummaryThis model is a cable chain. You can download the STL file from the original listing below and print it at home.
About this model
SummaryThis model is a cable chain. It is open to allow to easily change the cables inside and cable ties can be used to maintain the cable.The file "cable chain" should be printed as many times as you need (one link for every 16mm of cable) while the other files are all used to attach the extremities of the chain to you device. The "motor" and "fan" files are designed to be attached to a Nema 17 motor and a 4cm fan. All other attaches have a 5mm hole and are intended to be screwed on a 2020 aluminum profile.All models can be printed without support. However the bottom part of the pins in the links should be cleaned with a cutter or use a file to make sure the parts rotate easily.The parts are designed with a 0.3mm clearance and rescaling the files will not change anything so try decreasin…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Cable chain minimalist, open, fast print is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by remi.rafael.
- Who made this model?
- Designed by remi.rafael, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in cablechain
More from remi.rafael
