Bambu Lab P1P Printable Cable Drag Chain
Source: MakerWorld by brody.bolanos
The Bambu Lab P1P Printable Cable Drag Chain is a free printable 3D model from MakerWorld by brody.bolanos. Bambu Lab P1P Printable Cable Drag ChainI created a printable cable chain for the p1p as not everyone has access to the cable chain from Amazon that I linked in my other design . You can download the STL file from the original listing below and print it at home.
About this model
Bambu Lab P1P Printable Cable Drag ChainI created a printable cable chain for the p1p as not everyone has access to the cable chain from Amazon that I linked in my other design . There were a few things that I wanted to meet or exceed from the store bought design including a reduction in sagging and lighter weight. Chain has a minimum bending radius of 18mm, making sure the wire doesn't get over bent.When fully extended ( side with the latches face down) the chain has a slight curve, meaning it wont lay completely flat. This is intentional to make sure the chain wont accidently bend the opposite way.Each of my links weigh 1.963g and the cable chain links from amazon weigh 2.160g. Below you can see the difference in sagging with the chains fully extended.Please use for the rest of the instr…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Bambu Lab P1P Printable Cable Drag Chain is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by brody.bolanos.
- Who made this model?
- Designed by brody.bolanos, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in cablechain
More from brody.bolanos
