Curtain Rod Holders for Wooden Dowels
Source: MakerWorld by Matthew
The Curtain Rod Holders for Wooden Dowels is a free printable 3D model from MakerWorld by Matthew. My spouse made some curtains and I used wood dowels (1/2"/13mm or 5/8"/16mm depending on the span) along with these holders. You can download the STL file from the original listing below and print it at home.
About this model
My spouse made some curtains and I used wood dowels (1/2"/13mm or 5/8"/16mm depending on the span) along with these holders. The parametric file from the source object was utilized to generate the end and middle supports; the doubled middle supports were created by just duplicating the single middle supports in 3d builder. I used #6 screws to mount the holders to the walls and #4 hardware to secure the dowels to the holders. No screws needed to hold the rods with the middle support pieces and only 1 screw is really needed for the middle supports.I initially made these out of PLA. They lasted several years but eventually drooped enough that I decided to replace them. Just swapped them all out with ASA copies.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Curtain Rod Holders for Wooden Dowels is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Matthew.
- Who made this model?
- Designed by Matthew, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in parametric
More from Matthew
