2020 Hinge Corner
Source: Thingiverse by walter
The 2020 Hinge Corner is a free printable 3D model from Thingiverse by walter. Lightweight hinge for connecting two 2020 aluminum extrusions. You can download the STL file from the original listing below and print it at home.
About this model
Lightweight hinge for connecting two 2020 aluminum extrusions. Designed to fit within the 20mm corner cube. It isn't designed to be load bearing, but should be strong enough to hold the extrusions its attached to. I would try 910 Nylon if you need it to support more weight. There are multiple angles, but I've only tested the 100° version. Print two matching pieces to make a connector. Parts: 3 - M5x20 Countersunk Socket Screw - the ones that screw into the ends of the tapped aluminum extrusion can be much shorter 2 - M5 Washers - these are inserted from the outside 1 - M5 Locknut - it's easier to tighten if you put the nylon side inside 3 - 8mmx1mm Spacers 2 - 5x10x4 Bearings* - the stack of bearings and spacers goes inside Printer: -- Eustathios Filaments: (full list can be found on thrin…
Frequently asked questions
- Is this 3D model free to download?
- Yes. 2020 Hinge Corner is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by walter.
- Who made this model?
- Designed by walter, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in 2020
![Twist In Cable Clamp [2020 Aluminium Profile] 3D model](https://cdn.thingiverse.com/renders/b4/60/33/0a/3f/b2fe56039c2d89d523b53903f64b45ac_preview_card.jpg)
