Anycubic ACE 2 Pro Internal Filament PTFE Guide
Source: Thingiverse by strozzi47
The Anycubic ACE 2 Pro Internal Filament PTFE Guide is a free printable 3D model from Thingiverse by strozzi47. This is an internal filament guide designed for the Anycubic ACE Pro. You can download the STL file from the original listing below and print it at home.
About this model
This is an internal filament guide designed for the Anycubic ACE Pro. It helps ensure smooth filament feeding inside the ACE Pro and prevents binding or friction. The project consists of two 3D printed parts that connect together using a standard piece of PTFE tube (the same type used to connect the ACE Pro to the printer). The model is designed with a slight interference fit to hold the PTFE tube tightly in place without extra hardware. Adding a drop of glue between the tube and the printed parts is optional, but it can provide an extra level of retention. BOM / Additional Parts: 1x Short piece of standard PTFE tube (ID 2mm / OD 4mm) Super glue / CA glue (optional) Print Settings: Printer: Anycubic Kobra 3 Material: PETG or PLA Layer Height: 0.20 mm Infill: 20% - 30% Walls/Perimeters: 3 S…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Anycubic ACE 2 Pro Internal Filament PTFE Guide is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by strozzi47.
- Who made this model?
- Designed by strozzi47, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in accessories
