Is this 3D model free to download?

Yes, 耗材丝样本盒-双折叠 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by Amblecloud, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

耗材丝样本盒-双折叠 3D printable model by Amblecloud

耗材丝样本盒-双折叠

Source: MakerWorld by Amblecloud

The 耗材丝样本盒-双折叠 is a free printable 3D model from MakerWorld by Amblecloud. 完合可展开合页一体打印直接可用。不干胶标签用来记录耗材的品牌、材质、购买日期等信息。尺寸小巧紧凑，随身携带非常方便。注意事项：PLA和PETG都测试过了，合页可靠，固定耗材紧固，第一次用有点紧可先活动活动，因为面积大，打印前温水洗洁精先清洗打印板，打印完成后待完全冷却后再从打印板上取下。以免影响首层外观。设计思路：开封新的耗材都会剪下来一段耗材头，就可以. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-10-16 Print time: 1h 26m Filament: 27 g License: SDFL · non-commercial Category: Home & Organization

Tags: 耗材盒, 色卡, 收纳, 样本, 折叠, 合页, 必打, 耗材样本, 耗材样品, 盒子

About this model

完合可展开合页一体打印直接可用。不干胶标签用来记录耗材的品牌、材质、购买日期等信息。尺寸小巧紧凑，随身携带非常方便。注意事项：PLA和PETG都测试过了，合页可靠，固定耗材紧固，第一次用有点紧可先活动活动，因为面积大，打印前温水洗洁精先清洗打印板，打印完成后待完全冷却后再从打印板上取下。以免影响首层外观。设计思路：开封新的耗材都会剪下来一段耗材头，就可以直接放入这个样本盒里面。这样不用翻箱倒柜就知道现在库存耗材的情况了。能看到真实的质感和色彩，因为有时候批次不同，耗材也有色差。也不用像色卡还需要打印。一盒可以放20根。渐变耗材可以放两根一组。尺寸轻薄省料也非常方便携带外出。耗材丝剪成30mm一段，标签贴纸的尺寸为30mm×20mm。

Frequently asked questions

Is this 3D model free to download?: Yes. 耗材丝样本盒-双折叠 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Amblecloud.
Who made this model?: Designed by Amblecloud, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.