Google Pixel 9 Pro Magsafe Adhesive Skin
Source: Thingiverse by maxdoes
The Google Pixel 9 Pro Magsafe Adhesive Skin is a free printable 3D model from Thingiverse by maxdoes. This is a 1.2mm thin skin with embedded magnets that you can adhere to the back of your Pixel 9 Pro to make it compatible with Apple Magsafe accessories. You can download the STL file from the original listing below and print it at home.
About this model
This is a 1.2mm thin skin with embedded magnets that you can adhere to the back of your Pixel 9 Pro to make it compatible with Apple Magsafe accessories. The bottom layer is 0.1mm so make sure your first layer is thin enough. (You may need to change the setting from 0.2mm to 0.1mm.) Make sure you have good first layer flow so there are no gaps between lines. The magnets are strong and will pull through the plastic if it's too weak. The print has a circular slot that fits these magnets. You will need to remove the magnets from the metal plate. The magnets will not want to go together so it's recommended to use another Magsafe ring on the other side of the 3D printed skin so the loose magnets have something to attract to while you arrange them into the circle. Then you can remove the second …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Google Pixel 9 Pro Magsafe Adhesive Skin is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by maxdoes.
- Who made this model?
- Designed by maxdoes, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Google Pixel
