Anycubic i3 MEGA Chains
Source: Thingiverse by CuriousTech
The Anycubic i3 MEGA Chains is a free printable 3D model from Thingiverse by CuriousTech. Updated. You can download the STL file from the original listing below and print it at home.
About this model
Updated. The Z chains aren't great looking but work. There are 14 links on each side. Pictured fully extended and all the way down. 10mm clips on left, 7mm on right. The Z top connectors snap into the holes under the Z carriages. They're somewhat tight, but a screw and nut through the hole might be needed later. This is a set of chains for X and Y. I used the links by junaling, but changed it to a snap-in retainer clip. It's still compatible with those links though. It's easy to install (if you can find 2 screws to fit the X carriage, and 2 to fit the base, plus the 4 for the Z bottoms), but all parts except the clips were made using supports and brims because of the added slots for the clips, and for my poorly designed brackets, so it's a lot of work removing the excess plastic. The X cha…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Anycubic i3 MEGA Chains is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by CuriousTech.
- Who made this model?
- Designed by CuriousTech, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Anycubic
