enclosure designs for CR-10
Source: Thingiverse by psdesign
The enclosure designs for CR-10 is a free printable 3D model from Thingiverse by psdesign. I am posting my plans to the enclosure for the CR-10. You can download the STL file from the original listing below and print it at home.
About this model
I am posting my plans to the enclosure for the CR-10. I made mine quite a bit wider so I can change filament and get to extruder easily, but I left minimum dimensions as well. I reused spool holder from CR-10 and mounted to frame. Here is most everything you will need: Aluminum tube 30 mm x 30 or 1 /4” x 1 1/4 Foam sealing tape (26' was just too short of the large cabinet size, will need two orders) Hinge hardware www.cshardware.com 54.25.02 hinges 4 pairs 54.27.02 slip on catch 4 pcs 58.22.08 strong double magnetic latch 4 pcs Desk hole cover Plywood Top and Bottom 1/2" 2 pcs : 28 5/16 x 25 11/16 1/4” Acrylic Sheet (measure final openings in your sides and subtract 10 mms from all directions to leave a gap of 5 mms all around) Self tapping screws for aluminum, wood screws for wood to wood…
Frequently asked questions
- Is this 3D model free to download?
- Yes. enclosure designs for CR-10 is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by psdesign.
- Who made this model?
- Designed by psdesign, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in enclosure
