Raspberry Pi Pico W | Pico 2W | Slim | SnapFit | DS5Dongle
Source: Thingiverse by BergM
The Raspberry Pi Pico W | Pico 2W | Slim | SnapFit | DS5Dongle is a free printable 3D model from Thingiverse by BergM. I was looking for a case for the Raspberry Pi Pico 2W to use with the DS5Dongle project, which turns the Pico 2W into a receiver for the DualSense controller. You can download the STL file from the original listing below and print it at home.
About this model
I was looking for a case for the Raspberry Pi Pico 2W to use with the DS5Dongle project, which turns the Pico 2W into a receiver for the DualSense controller. Since I also wanted to learn Fusion 360, I came across the “Raspberry Pi Pico W | Pico 2W | Slim | SnapFit” case designed by i-Boxit. As I’m not very good at soldering, I decided to modify the design to work with a Micro USB to USB Type-C adapter (approximately $1 for a pack of 5), making the build easier without requiring additional soldering. The use of the clear filament is optional. --- DS5Dongle by awalol Inspired by “Raspberry Pi Pico W | Pico 2W | Slim | SnapFit” project by i-Boxlt Micro USB to USB Type-C Adapter (Aliexpress)
Frequently asked questions
- Is this 3D model free to download?
- Yes. Raspberry Pi Pico W | Pico 2W | Slim | SnapFit | DS5Dongle is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by BergM.
- Who made this model?
- Designed by BergM, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in DS5 Bridge
