Acorn A310/1 A410/1 A420/1 A440/1 PSU Case for Meanwell PT-65A
Source: Thingiverse by distantcamera
The Acorn A310/1 A410/1 A420/1 A440/1 PSU Case for Meanwell PT-65A is a free printable 3D model from Thingiverse by distantcamera. This will allow you to completely replace the PSU in an Acorn Archimedes A3xx or A4xx/1 series machine using a Meanwell PT-65A power supply. You can download the STL file from the original listing below and print it at home.
About this model
This will allow you to completely replace the PSU in an Acorn Archimedes A3xx or A4xx/1 series machine using a Meanwell PT-65A power supply. You'll need to either adapt your existing wiring loom, or build a new wiring loom, remembering to connect your case to Earth using a ring and one of the screw positions on the case. To print supports in the right place, and not fill all the holes with supports I set the support overhang to 80%. You can get a grommet for the cable hole from Amazon: The screws are all 3mm self tappers.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Acorn A310/1 A410/1 A420/1 A440/1 PSU Case for Meanwell PT-65A is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by distantcamera.
- Who made this model?
- Designed by distantcamera, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in acorn
