Knobs, based on: M3, M4, M5, M6, M8, M10 nuts and lock-nuts
Source: Thingiverse by funbart
The Knobs, based on: M3, M4, M5, M6, M8, M10 nuts and lock-nuts is a free printable 3D model from Thingiverse by funbart. Knobs, based on: M3, M4, M5, M6, M8, M10 normal nuts and lock-nuts (they are a bit higher). You can download the STL file from the original listing below and print it at home.
About this model
Knobs, based on: M3, M4, M5, M6, M8, M10 normal nuts and lock-nuts (they are a bit higher). After trying them I decided to make two versions of them: a loose fit (the nut can be pressed by hand in the knob) and a tight fit (the nut has to be pressed or hammered in the knob). The M4 knob is made for the CraftBot buildplate. I have printed them with Kisslicer, 0.3mm layer height, 5 loops, 2mm skin thickness, 33% infill. They are designed to be printed without support structure. The knobs have little "snappers" at the bottom, to prevent the nuts to fall out , after hammering / drive them in the knob. Scale / adjust the inset parameter of Kisslicer to fit your specific printer needs.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Knobs, based on: M3, M4, M5, M6, M8, M10 nuts and lock-nuts is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by funbart.
- Who made this model?
- Designed by funbart, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Knobs
