bigtreetech TFT35 E3 V3.0 skr 1.3 1.4 3D printable model by Michael van Schaik
bigtreetech TFT35 E3 V3.0 skr 1.3 1.4 photo 1 bigtreetech TFT35 E3 V3.0 skr 1.3 1.4 photo 2 bigtreetech TFT35 E3 V3.0 skr 1.3 1.4 photo 3

bigtreetech TFT35 E3 V3.0 skr 1.3 1.4

Source: MyMiniFactory by Michael van Schaik

The bigtreetech TFT35 E3 V3.0 skr 1.3 1.4 is a free printable 3D model from MyMiniFactory by Michael van Schaik. This is my attempt to make case for BigTreeTech TFT35 e3 v3.0 display. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MyMiniFactory
QR code to download the Thinger app
On a computer? Scan with your phone to install the free app.
56 saves Source: MyMiniFactory Updated 2026-11-13 License: CC-BY-NC-SA · non-commercial

Tags: TFT, 35, Bigtreetech, skr, E3, v3.0, 1.3, 1.4

About this model

This is my attempt to make case for BigTreeTech TFT35 e3 v3.0 display. There are accessible SD card slot, USB port, EXT1 & EXT2 ports and TFT port. Reset button works pefekt. UPDATE : Front_v1 no screen edges any more and the encoder hole a bit more to let the LED's shine through a bit more. Mount is 20mm wide, so it fits almost any aluminium profile used to build printer frame. You can use it on 2020, 2040, 3030 or any profile with at least 5mm wide slot. Hardware used:4x M3x16 HEX head screw - main case screwscase - not needed if you don't need extreme stiffness)2x M4x20 HEX head screw - mount screws (swivel mechanism)2X M4 nut (nyloc nut prefered) - for mount screws (swivel mechanism)2x M4 screws and nuts for your printer frame (M4x10/12 and T-Nuts for aluminium profiles)Print SettingsP…

Frequently asked questions

Is this 3D model free to download?
Yes. bigtreetech TFT35 E3 V3.0 skr 1.3 1.4 is free to download from MyMiniFactory. Open it in the free Thinger app, or use the "Download from MyMiniFactory" link above to open the original listing.
Where is the STL hosted?
The download is hosted by MyMiniFactory, not by Thinger. We link you directly to the original listing by Michael van Schaik.
Who made this model?
Designed by Michael van Schaik, published on MyMiniFactory. Please credit the creator when sharing your print online.
Can I print this at home?
Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.

Similar 3D models in TFT

Gear / Paid link The gear we print with Filament, tools, build plates and the hardware behind the models on Thinger, in one shoppable photo on our Amazon storefront. See the gear → Thinger earns a commission from qualifying purchases made through this link, at no extra cost to you.
Amazon price tracker / Paid links

Filament price drops for your next print

We track hundreds of filaments, resins, nozzles and tools on Amazon several times a day. Don't buy before you compare: see today's best prices and the real discount, measured against 30 days of price history.

Compare all prices →

Thinger earns a commission from qualifying purchases made through these links, at no extra cost to you. The price on Amazon at checkout is the one that counts. Israeli buyers: free shipping over $49 deals in Hebrew (קונים מישראל: הדילים עם משלוח חינם מעל $49, בעברית).

Open in Thinger Get STL