38 mm to 30 mm Hose Adapter - Vacuum / Dust Hose Step Reducer (38mm to 30mm) 3D printable model by y0uy0uday0o
38 mm to 30 mm Hose Adapter - Vacuum / Dust Hose Step Reducer (38mm to 30mm) photo 1 38 mm to 30 mm Hose Adapter - Vacuum / Dust Hose Step Reducer (38mm to 30mm) photo 2 38 mm to 30 mm Hose Adapter - Vacuum / Dust Hose Step Reducer (38mm to 30mm) photo 3

38 mm to 30 mm Hose Adapter - Vacuum / Dust Hose Step Reducer (38mm to 30mm)

Source: Cults3D by y0uy0uday0o

The 38 mm to 30 mm Hose Adapter - Vacuum / Dust Hose Step Reducer (38mm to 30mm) is a free printable 3D model from Cults3D by y0uy0uday0o. Step adapter that joins a 38 mm hose or port to a 30 mm hose or port. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from Cults3D
QR code to download the Thinger app
On a computer? Scan with your phone to install the free app.
30 saves Source: Cults3D Updated 2026-11-16 License: CC-BY · commercial OK Category: Tools & Workshop

Tags: hose adapter, vacuum adapter, reducer, 38mm, 30mm, shop vac, dust collection, step adapter, workshop, parametric

About this model

Step adapter that joins a 38 mm hose or port to a 30 mm hose or port. Typical uses: vacuum cleaner and shop vacuum hoses, dust extraction on power tools, pond and aquarium tubing, ventilation hoses. What you get - hose_adapter_38mm_to_30mm.stl: the adapter, 29 mm + 25 mm male ends, 2.4 mm walls, 45-degree chamfered collar. - fit_test_38_30.stl: two 8 mm rings to check the fit in 10 minutes before printing the full part. How to pick the size Measure the INNER diameter of the hose cuff or port that each end will slide into. Each end is a gentle taper (nominal +0.4 mm at the collar, -1.0 mm at the tip), so it wedges in tight and covers small variations between brands. Print settings (suggested) - Orientation: as supplied, bigger end on the bed, no supports needed (all slopes are 45 degrees or…

Frequently asked questions

Is this 3D model free to download?
Yes. 38 mm to 30 mm Hose Adapter - Vacuum / Dust Hose Step Reducer (38mm to 30mm) is free to download from Cults3D. Open it in the free Thinger app, or use the "Download from Cults3D" link above to open the original listing.
Where is the STL hosted?
The download is hosted by Cults3D, not by Thinger. We link you directly to the original listing by y0uy0uday0o.
Who made this model?
Designed by y0uy0uday0o, published on Cults3D. Please credit the creator when sharing your print online.
Can I print this at home?
Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.

Similar 3D models in hose adapter

More from y0uy0uday0o

Browse related collections

Free Warhammer 40K Army Model STL Files Free Workshop Tool Holders & Organizers
Gear / Paid link The gear we print with Filament, tools, build plates and the hardware behind the models on Thinger, in one shoppable photo on our Amazon storefront. See the gear → Thinger earns a commission from qualifying purchases made through this link, at no extra cost to you.
Amazon price tracker / Paid links

Filament price drops for your next print

We track hundreds of filaments, resins, nozzles and tools on Amazon several times a day. Don't buy before you compare: see today's best prices and the real discount, measured against 30 days of price history.

Compare all prices →

Thinger earns a commission from qualifying purchases made through these links, at no extra cost to you. The price on Amazon at checkout is the one that counts. Israeli buyers: free shipping over $49 deals in Hebrew (קונים מישראל: הדילים עם משלוח חינם מעל $49, בעברית).

Open in Thinger Get STL